SANDSTROM PRODUCTS COMPANY -- 27A SOLID FILM LUBRICANT (MIL-PRF-46147C TYPE 1, FORM 1)  -- 9150-00-142-9361
<pre>=====================  Product Identification  =====================

Product ID:27A SOLID FILM LUBRICANT (MIL-PRF-46147C TYPE 1, FORM 1)
MSDS Date:12/05/2001
FSC:9150
NIIN:00-142-9361
Status Code:A
MSDS Number: CLSCX
=== Responsible Party ===
Company Name:SANDSTROM PRODUCTS COMPANY
Address:224 SOUTH MAIN STREET
City:PORT BYRON
State:IL
ZIP:61275
Country:US
Info Phone Num:309-523-2121
Emergency Phone Num:(800) 424-9300
Resp. Party Other MSDS Num.:E735-675
Chemtrec Ind/Phone:(800)424-9300
CAGE:34227
=== Contractor Identification ===
Company Name:SANDSTROM PRODUCTS COMPANY
Address:224 SOUTH MAIN STREET
Box:City:PORT BYRON
State:IL
ZIP:61275
Country:US
Phone:309-523-2121
Contract Num:SP0450-02-M-L333
CAGE:34227

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPYLENE GLYCOL METHYL ETHER ACETATE
CAS:108-65-6
RTECS #:AI8925000

Ingred Name:CYCLOHEXANONE
CAS:108-94-1
RTECS #:GW1050000
OSHA PEL:25 PPM S
ACGIH TLV:25 PPM S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHYL ETHYL KETONE
CAS:78-93-3
RTECS #:EL6475000
Minumum % Wt:15.
Maxumum % Wt:50.
OSHA PEL:200 PPM
ACGIH TLV:200 PPM
ACGIH STEL:300 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:DIBASIC LEAD PHOSPHITE
CAS:12141-20-7
Minumum % Wt:1.
Maxumum % Wt:5.
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.15 MG/M3

Ingred Name:ANTIMONY TRIOXIDE
CAS:1309-64-4
RTECS #:CC5650000
Minumum % Wt:1.
Maxumum % Wt:5.
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:MOLYBDENUM DISULFIDE
CAS:1317-33-5
RTECS #:QA4697000
OSHA PEL:10 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:BISPHENOL "A" EPOXY RESIN
CAS:25036-25-3

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:YES    IARC:UNKNOWN    OSHA:YES
Health Hazards Acute and Chronic:EYE CONTACT: IRRITATION AND CORNEAL
    INJURY. SKIN: IRRITATION. PROLONGED CONTACT MAY RESULT IN DAMAGE,
    ABSORPTION THROUGH SKIN, DEFATTING, DRYING, DERMATITIS. INHALATION:
    IRRITATION TO NOSE, THROAT, RE SPIRATORY TRACT, MUCOUS MEMBRANES.
    HIGH CONCENTRATIONS OF VAPOR MAY PRODUCE CENTRAL NERVOUS SYTEM
    DEPRESSION. REPORTS HAVE ASSOCIATED PROLONGED OVEREXPOSURE TO
    SOLVENTS WITH PERMAMENT BRAIN AND NERVOU S SYSTEM DAMAGE.
    INTENTIONAL MISUSE BY CONCENTRATING AND INHALING CONTENTS MAY BE
    HARMFUL OR FATAL.  INGESTION: MOERATELY TOXIC. MAY CAUSE KIDNEY
    DAMAGE, RED BLOOD CELL HEMOLYSIS LEADING TO KIDNEY AND  LIVER
    DAMAGE, CNS DEPRESSION.
Explanation of Carcinogenicity:ANTIMONY TRIOXIDE IS LISTED BY NTP AND
    OSHA AS A CARCINOGEN OR A POSSIBLE CARCINOGEN. REFER TO APPROPRIATE
    REFERENCE SOURCES FOR ADDDITIONAL INFORMATION CONCERING
    CARCINOGENS.
Effects of Overexposure:EYE, SKIN, RESPIRATORY, AND GASTRO-INTESTINAL
    IRRITATION. CENTRAL NERVOUS SYSTEM IS EVIDENCED BY HEADACHE,
    DIZZINESS, NAUSEA, AND SYMPTOMS OF INTOXICATION; IN EXTREME CASES,
    UNCONSCIOUSNESS AND DEATH  MAY OCCUR. LEAD POISONING MAY RESULT IN
    LOSS OF APPETITE, METALLIC TASTE IN MOUTH, ANXIETY, CONSTIPATION,
    NAUSEA, PALLOR, EXCESSIVE TIREDNESS, WEAKNESS, INSOMNIA, HEADACHE,
    NERVOUS IRRITABILITY, MUSCL E, AND JOINT PAIN, FINE TREMORS,
    NUMBNESS, DIZZINESS, HYPERACTIVITY AND COLIC.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYE, AND
    RESPIRATORY DISORDERS MAY BE AGRAVATED BY EXPOSURE. IMPAIRED
    CENTRAL NERVOUS SYTEM FUNCTIONS FROM PREEXISTING DISORDERS MAY BE
    AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH  WITH  WATER FOR 15 MINUTES WHILE HOLDING
    EYELIDS OPEN. SEEK MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
    CLOTHING AND SHOES. WIPE EXCESS FROM SKIN AND FLUSH WITH WATER
    USING SOAP	 SEEK MEDICAL ATTENTION IF IRRITATION OCCURS. 
    DECONTAMINATE CLOTHING BEFORE REUSE. INHALATION: MOVE TO FRESH AIR.
    TREAT SYMPTOMATICALLY. PROVIDE OXYGEN IF BREATHING IS DIFFICULT.
    GIVE ARTIFICIAL RESPI RATION IF NOT BREATHING. SEEK MEDICAL
    ATTENTION. INGESTION: DILUTE WITH TWO GLASSES OF WATER UNLESS
    UNCONSCIOUS OR DROWSY. INDUCE VOMITING BY GIVING TWO TABLE SPOONS
    OF IPECAC OR TOUCHING A FINGER TO  BACK OF THROAT.(CONTD. SEE
    "OTHER INFO")

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=6.7C, 44.F
+/- 2 DEGREES
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE. FLAMMABILITY CLASSIFICATION: OSHA: FLAMMABLE LIQUID, CLASS
    1B. DOT: FLAMMABLE LIQUID.
Fire Fighting Procedures:WARNING. FLAMMABLE. CLEAR FIRE AREA OF
    UNPROTECTED PERSONNEL. DO NOT ENTER CONFINED FIRE SPACE WITHOUT
    HELMET, FACE SHIELD, BUNKER COAT, GLOVES, RUBBER BOOTS, AND A
    POSITIVE PRESSURE NIOSH-APPROVED SE LF CONTAINED BREATHING
    APPARATUS.
Unusual Fire/Explosion Hazard:CONTAINERS EXPOSED TO INTENSE HEAT FROM
    FIRES SHOULD BE COOLED WITH WATER TO PREVENT VAPOR PRESSURE BUILDUP
    WHICH COULD RESULT IN CONTAINER RUPTURE. CONTAINER AREAS EXPOSED TO
    DIRECT FLAME CONTACT SHO ULD BE COOLED WITH LARGE QUANTITIES OF
    WATER AS NEEDED TO PREVENT WEAKENING OF CONTAINER STRUCTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LARGE SPILL: WEAR APPROPRIATE RESPIRATOR AND
    PROTECTIVE CLOTHING. STOP LEAK IF POSSIBLE. DIKE AND CONTAIN. IF
    VAPOR CLOUD FORMS, USE WATER FOG SUPPRESS. PUMP CONTAINED SPILL TO
    STORAGE/SALVAGE VESSELS . SOAK UP RESIDUE WITH AN ABSORBENT (CLAY,
    SAND, OTHER SUITABLE MATERIAL). PLACE IN NON-LEAKING CONTAINERS FOR
    PROPER DISPOSAL. FLUSH AREA WITH WATER TO REMOVE RESIDUE.(CONTD.
    SEE "OTHER PRECAUTIONS")

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP LIQUID AND VAPOR AWAY FROM HEAT,
    SPARKS, AND FLAME. EXTINGUISH PILOT LIGHTS, CIGARETTES AND TURN OFF
    OTHER POSSIBLE SOURCES OF IGNITION PRIOR TO USE AND UNTIL VAPORS
    ARE GONE. SURFACES THAT ARE S UFFICIENTLY HOT MAY IGNITE PRODUCT IN
    THE ABSENCE OF SPARKS OR FLAME. (CONTD. SEE "WASTE DISPOSAL")
Other Precautions:(CONTD. FROM "SPILL RELEASE") DISPOSE OF FLUSH
    SOLUTIONS AS ABOVE. SMALL SPILLS: TAKE UP WITH AND ABSORBENT
    MATERIAL AND PLACE IN NON-LEAKING CONTIANERS, SEAL TIGHTLY FOR
    PROPER DISPOSAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID PROLONGED OR REPEATED BREATHING OF
    VAPORS/DUST. IF EXPOSURE EXCEEDS TLV USE A NIOSH-APPROVED
    RESPIRATOR TO PREVENT OVEREXPOSURE.
Ventilation:USE VENTILATED AS REQUIRED TO CONTROL VAPOR/DUST
    CONCENTRATIONS.
Protective Gloves:DO NOT GET ON SKIN OR ON CLOTHING.
Eye Protection:AVOID CONTACT WITH EYES . WEAR GOGGLES IF LIKELIHOOD OF
    CONTACT WITH EYES..
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS SHOULD
    BE AVAILABLE FOR USE IN AN EMERGENCY.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
    DRINKING, SMOKING, OR USING TOILET FACILITIES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Vapor Density:>1
Spec Gravity:9.04 +/- 0.2 LBS/GALLON
pH:3.00
VOC Grams/Liter:5.85
Evaporation Rate &amp; Reference:0.00 (N-BUTYL ACETATE=1)
Percent Volatiles by Volume:83.43 +/- 2%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL. STRONG ACIDS.
Hazardous Decomposition Products:LEAD OXIDE FUMES, CARBON DIOXIDE,
    CARBON MONOXIDE AND UNIDENTIFIED ORGAINC COMPOUNDS MAY BE FORMED
    DURING COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:THE DRIED FILM OF THIS PRODUCT MAY BECOME A
    DUST NUISANCE WHEN REMOVED BY SANDING OR GRINDING. OSHA RECOMMENDS
    A PEL/TWA OF 15 MG/M3 FOR TOTAL DUST AND 5 MG/M3 FOR THE RESPIRABLE
    FRACTION. ACGIH RECOM MENDS A TLV/TWA OF 10 MG/M3 FOR TOTAL DUST.
    (SKIN) ABSORPTION MAY CONTRIBUTE TO THE OVERALL EXPOSURE TO THIS
    MATERIAL. TAKE APPROPRIATE MEASURES TO PREVENT SKIN CONTACT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REFER TO LATEST EPA OR STATE REGULATIONS
    REGARDING PROPER DISPOSAL. (CONTD. FROM	     'HANDLING") VAPORS
    MAY TRAVEL TO IGNITION SOURCES DISTANT FROM HANDLING SITE. KEEP
    CONTAINERS CLOSED WHEN NOT	IN USE. USE WITH ADEQUATE VENTILATION.
    CONTAINERS, EVEN EMPTIED, CAN CONTAIN EXPLOSIVE VAPORS. DO NO T
    CUT, DRILL, GRIND, OR WELD NEAR CONTAINERS.

=====================  Regulatory Information  =====================

SARA Title III Information:UNDER REPORTING REQUIREMENTS OF SECTION 313
    OF TITLE I I I OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT
    OF 1986 (SARA) AND 40 CFR PART 372, CHEMICALS LISTED ON THE SECTION
    313 LIST (40 CFR PART  372.65) ARE	METHYL ETHYL KETONE (78-93-3),
    15-50 WT %, DIBASIC LEAD PHOSPHITE (12141-20-7), 1-5 WT%,  ANTIMONY
    TRIOXIDE (1309-64-4), 1-5 WT %.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.