MEASUREMENTS GROUP INC -- M-BOND 200 ADHESIVE  -- 8040-01-027-1893
<pre>=====================  Product Identification  =====================

Product ID:M-BOND 200 ADHESIVE
MSDS Date:08/11/1996
FSC:8040
NIIN:01-027-1893
Kit Part:Y
MSDS Number: CFWZY
=== Responsible Party ===
Company Name:MEASUREMENTS GROUP INC
Box:27777
City:RALEIGH
State:NC
ZIP:27611
Country:US
Info Phone Num:919-365-3800
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:R. L. FRIDLEY
CAGE:88952
=== Contractor Identification ===
Company Name:MEASUREMENTS GROUP INC
Address:9517 US 64 HWY
Box:City:WENDELL
State:NC
ZIP:27591
Country:US
Phone:919-365-3800
CAGE:88952

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYL CYANOACRYLATE
CAS:7085-85-0
Fraction by Wt: 90-95%
Other REC Limits:NONE RECOMMENDED

Ingred Name:POLYMETHYLMETHACRYLATE
CAS:9011-14-7
RTECS #:TR0400000
Fraction by Wt: 5-10%
Other REC Limits:NONE RECOMMENDED

Ingred Name:HYDROQUINONE (SARA 313) (CERCLA)
CAS:123-31-9
RTECS #:MX3500000
Fraction by Wt: 500% PPM
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:ALKYL-2-CYANOCRYLATE (7085-85-0)
CAS:137-05-3
RTECS #:AS7000000
Fraction by Wt: 92.0%
Other REC Limits:NONE RECOMMENDED

Ingred Name:METHYL 2-CYANOACRYLATE
CAS:137-05-3
RTECS #:AS7000000
Fraction by Wt: 90-95%
Other REC Limits:NONE RECOMMENDED

Ingred Name:POLY (METHYL METHYLCRYLATE)
CAS:9011-14-7
Fraction by Wt: 5-10%
Other REC Limits:NONE RECOMMENDED

Ingred Name:HYDROQUINONE (SARA 313) (CERCLA)
CAS:123-31-9
RTECS #:MX3500000
Fraction by Wt: 0.1-0.5%
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:METHYL CYANOACRYLATE
CAS:137-05-3
RTECS #:AS7000000
Fraction by Wt: >80.0%
Other REC Limits:NONE RECOMMENDED

Ingred Name:POLY METHYL METHACRYLATE
CAS:9011-14-7
RTECS #:TR0400000
Fraction by Wt: <15.0%
Other REC Limits:NONE RECOMMENDED

Ingred Name:HYDROQUINONE (SARA 313) (CERCLA)
CAS:123-31-9
RTECS #:MX3500000
Fraction by Wt: <5.0%
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL: IRRITATION. EYE:
    CYANOACRYLATES. MAY BOND EYELID TO EYE. SKIN: MAY BOND SKIN
    RAPIDLY/STRONGLY. MAY BURN UPON SOLIDIFICATION. INGEST: ADHESIVE
    SOLIDIFIES & ADHERES IN MOUNDS. LIPS MAY STICK TOGE THER. CHRONIC:
    SKIN, ALLERGIES, ASTHMA-LIKE SYMPTOMS.

=======================  First Aid Measures  =======================

First Aid:SKIN: SOAK IN SOAPY WATER. PEEL/ROLL APART W/SPATULA/TEASPOON
    HANDLE. REMOVE ADHESIVE W/SOAP & WATER. TREAT BURN. EYE: WASH
    W/WATER. USE GAUZE PATCH. EYE WILL OPEN IN 1-4 DAYS. EYEBALL: MAY
    CAUSE WEEP ING/DOUBLE VISION/TEARS WHILE EYE UNGLUES BY ITSELF.
    MOUTH: WASH W/WATER. USE SALIVA & PRESSURE FROM INSIDE MOUTH.
    PEEL/ROLL LIPS APART. INHAL: GET FRESH AIR. GET MED AID. INGEST:
    SALIVA WILL LIFT *

=====================  Fire Fighting Measures  =====================

Flash Point:150 TO 200F
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLOOD W/WATER TO POLYMERIZE ADHESIVE & CONTROL
    VAPORS. SOAK UP W/INERT ABSORBENT. SCRAPE/CURE PRODUCT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT OR <75F. AVOID CONTACT
    W/SKIN/EYES. AVOID BREATHING VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE AIR SUPPLIED RESPIRATOR AND SOLVENT FILTER
    MASK.
Ventilation:LOCAL EXHAUST (MECHANICAL).
Protective Gloves:POLYURETHANE, COTTON.
Eye Protection:SAFETY GLASSES/GOGGLES.
Other Protective Equipment:POLYURETHANE APRON RECOMMENDED.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USING PRODUCT.
Supplemental Safety and Health
* ADHESIVE IN 12 TO 48 HOURS. DONT FORCE REMOVAL, GET MED AID.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>150F,>66C
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:<0.2 @ 75F
Vapor Density:>1.0
Spec Gravity:1.09
Solubility in Water:INSOLUBLE.
Appearance and Odor:CLEAN LIQUID W/SHARP PUNGENT ODOR.
Percent Volatiles by Volume:NA

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOL, AMINES, ALKALIS, PERIOXIDES, COTTONS & WOOL.
Stability Condition to Avoid:HIGH TEMPERATURES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.