IMAGE INK JET PRINTING CORP -- 6191 ADDITIVE  -- 6850-00F053404
<pre>=====================  Product Identification  =====================

Product ID:6191 ADDITIVE
MSDS Date:01/29/1994
FSC:6850
NIIN:00F053404
MSDS Number: CDRHY
=== Responsible Party ===
Company Name:IMAGE INK JET PRINTING CORP
Address:1650 AIRPORT RD STE 103
City:KENNESAW
State:GA
ZIP:30144-5000
Country:US
Info Phone Num:404-421-7700
Emergency Phone Num:404-421-7700
CAGE:0ZH07
=== Contractor Identification ===
Company Name:IMAGE INK JET PRINTING CORP
Address:1650 AIRPORT RD STE 103
City:KENNESAW
State:GA
ZIP:30144-5000
Country:US
Phone:404-421-7700
CAGE:0ZH07

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ETHYL KETONE, 2-BUTANONE   *96-4*
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: >98%
Other REC Limits:590 MG/CUM
OSHA PEL:200 PPM
ACGIH TLV:200 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF THE NOSE &
    THROAT, NERVOUS SYSTEM DEPRESSION. INGESTION: IRRITATION OF THE
    DIGESTIVE TRACT & DEPRESSION OF THE CNS. ASPIRATION OF MATERIAL
    INTO THE LUNGS DUE TO VOMITING CAN	CAUSE CHEMICAL PNEUMONITIS
    WHICH CAN BEFATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DROWSINESS, DIZZINESS,
    LOSS OF COORDINATION, FATIGUE, STINGING, TEARING, REDNESS,
    SWELLING, DRYNESS, CRACKING.
Medical Cond Aggravated by Exposure:PRE-EXISTING LUNG DISORDERS
    (ASTHMA-LIKE CONDITIONS).

=======================  First Aid Measures  =======================

First Aid:INGESTION: ASPIRATION HAZARD. DON'T INDUCE VOMITING. IF
    DROWSY/UNCONSCIOUS, PLACE ON LEFT SIDE W/THE HEAD DOWN & DON'T GIVE
    ANYTHING BY MOUTH. INHALATION: REMOVE TO FRESH AIR. GIVE CPR,
    PREFERABLY MOU TH TO MOUTH. SKIN: FLUSH W/PLENTY OF COOL WATER.
    EYES: FLUSH FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:23F
Lower Limits:1.8
Upper Limits:11.4
Extinguishing Media:DRY CHEMICAL, ALCOHOL FOAM, CO2, HALON.
Fire Fighting Procedures:WEAR APPROPRIATE PROTECTIVE EQUIPMENT &
    RESPIRATORY PROTECTION. STOP SPILL/RELEASE & MOVE UNDAMAGED
    CONTAINERS W/O RISK. MINIMIZE/DISPERSE BY USING WATER SPRAY.
Unusual Fire/Explosion Hazard:VAPORS ARE > THAN AIR & CAN TRAVEL ALONG
    THE GROUND & COLLECT IN LOW AREAS. REMOVE SOURCES OF IGNITION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR APPROPRIATE RESPIRATORY PROTECTION &
    PROTECTIVE CLOTHING. CONTAIN MATERIAL & TRANSFER TO SECURE
    CONTAINERS. WHERE NECESSARY, COLLECT USING ABSORBED MEDIA. IN
    UNCONTROLLED RELEASE MATERIAL, USER S HOULD DETERMINE REPORTABLE
    APPLICABLE REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROTECT CONTAINER AGAINST PHYSICAL
    DAMAGE. OUTSIDE STORAGE IS PREFERRED. INSIDE STORAGE SHOULD BE IN
    AN APPROVED FLAMMABLE LIQUID STORAGE ROOM/CABINET
Other Precautions:ALL IGNITION SOURCES SHOULD BE ELIMINATED. SMOKING
    SHOULD BE PROHIBITED IN STORAGE AREAS. FREQUENT CAREFUL LEAKAGE
    INSPECTIONS SHOULD BE DONE. PROVIDE AUTOMATIC SPRINKLER SYSTEMS.
    FOR INDUSTRIAL USE O NLY. (SEE SUPP)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE EXPOSURE IS EXCEEDED, USE NIOSH/MSHA
    APPROVED RESPIRATORY PROTECTIVE EQUIPMENT.
Ventilation:ADEQUATE
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/CHEMICAL SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE.
Supplemental Safety and Health
AVOID SPREADING BURNING LIQUID W/WATER USED FOR COOLING PURPOSES.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:176F
Vapor Pres:70
Vapor Density:2.5
Spec Gravity:0.806
Solubility in Water:MISCIBLE
Appearance and Odor:PINK LIQUID W/CHARACTERISTIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, BASES, ALKALI METALS & HALOGENS.
Stability Condition to Avoid:HEAT, FLAME, SOURCES OF IGNITION.
Hazardous Decomposition Products:COMBUSTION: CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL RECOVERED MATERIAL SHOULD BE PACKED,
    LABELED, TRANSPORTED & DISPOSED/RECLAIMED IAW/FEDERAL, STATE &
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.