BULK CHEMICALS DISTRIBUTORS (OUT OF BUSINESS) -- CLEANING & LUBRICATING COMPOUND, MIL-C-83360  -- 6850-00-973-3122
<pre>=====================  Product Identification  =====================

Product ID:CLEANING & LUBRICATING COMPOUND, MIL-C-83360
MSDS Date:01/03/1994
FSC:6850
NIIN:00-973-3122
MSDS Number: BSFJM
=== Responsible Party ===
Company Name:BULK CHEMICALS DISTRIBUTORS (OUT OF BUSINESS)
Address:80 FIRST STREET
City:GRETNA
State:LA
ZIP:70053
Country:US
Info Phone Num:504-362-3232 OR 800-535-0095
Emergency Phone Num:504-362-3232 OR 800-535-0095
Preparer's Name:HMIS TECHNICIAN
CAGE:56921
=== Contractor Identification ===
Company Name:BULK CHEMICALS DISTRIBUTORS,INC
Address:80 FIRST STREET
City:GRETNA,
State:LA
ZIP:70053
Country:US
Phone:504-362-3232 DISCONNECTED(2-20-92)
CAGE:56921

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICON FLUID
CAS:63148-62-9
Fraction by Wt: 0.5-1.0%
Other REC Limits:NONE RECOMMENDED

Ingred Name:DICHLORODIFLUOROMETHANE  (SARA III)
CAS:75-71-8
RTECS #:PA8200000
Fraction by Wt: 35-40%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ozone Depleting Chemical:1

Ingred Name:TRICHLOROTRIFLUOROETHANE
CAS:354-58-5
RTECS #:KJ3975000
Fraction by Wt: 60-65%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION MAY CAUSE
    ASPHYXIATION OR RESPIRATORY TRACT IRRITATION. CHRONIC: UNKNOWN.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
    OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EXCITEMENT, UNCOORDINATION, TREMORS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH LOTS OF WATER FOR 15 MINUTES, HOLD LIDS
    OPEN. GET MEDICAL ATTENTION. INHALED: REMOVE TO FRESH AIR. RESTORE
    BREATHING IF NEEDED. GET MEDICAL ATTENTION. SKIN: REMOVE
    CONTAMINATED CLOTHE S. WASH WITH SOAP AND WATER. INGESTED: GET
    IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
    FULL PROTETCIVE GEAR.
Unusual Fire/Explosion Hazard:CONTACT WITH HOT REACTIVE, MOLTEN
    ALUMINUM, BARIUM FINES WILL PRODUCE RAPID EXOTHERMIC REACTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA. TAKE MATERIAL TO ISOLATED AREA
    AND ALLOW TO EVAPORATE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
    AREA. KEEP OUT OF DIRECT SUNLIGHT AND BELOW 120F.
Other Precautions:DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:USE ONLY IN WELL-VENTILATED AREAS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
    PROLONGED CONTACT.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
    DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
MSDS GENERATED BY HMIS TECHNICIAN FOR WALL-TO-WALL/TECH SUPPORT.
    MANUFACTURER OUT OF BUSINESS. INGREDIENTS DERIVED FROM DLSC-TIR.

==================  Physical/Chemical Properties  ==================

HCC:V2
Boiling Pt:=47.8C, 118.F
Vapor Pres:25 MM HG
Vapor Density:1.0(AIR=1)
Spec Gravity:1.46 (WATER=1)
Evaporation Rate &amp; Reference:0.63 (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQUID WITH FAINT ETHEREAL ODOR IN
    AEROSOL.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:TEMPERATURES >250F. HOT METAL SURFACES.
Hazardous Decomposition Products:HALOGENS, CARBONYL HALIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.PRODUCT CONTAINS OZONE DEPLETING SUBSTANCES. DO
    NOT PUNCTURE OR INCINERATE AEROSOL CANS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.