KAR PRODUCTS -- 3M STRIP CALK BLACK  -- 8030-00N021242
<pre>=====================  Product Identification  =====================

Product ID:3M STRIP CALK BLACK
MSDS Date:05/21/1990
FSC:8030
NIIN:00N021242
MSDS Number: BLKSL
=== Responsible Party ===
Company Name:KAR PRODUCTS
Address:461 NORTH THIRD AVE
City:DES PLAINES
State:IL
ZIP:60016
Country:US
Info Phone Num:708-296-6111
Emergency Phone Num:708-296-6111
CAGE:GO039
=== Contractor Identification ===
Company Name:KAR PRODUCTS
Address:461 NORTH THIRD AVENUE
Box:City:DES PLAINES
State:IL
ZIP:60016
Country:US
Phone:847-296-6111
CAGE:5L381
Company Name:KAR PRODUCTS
Address:461 NORTH THIRD AVENUE
City:DES PLAINES
State:IL
ZIP:60016
Phone:(312) 296-6111
CAGE:GO039

=============  Composition/Information on Ingredients  =============

Ingred Name:KAOLIN
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 1-10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:STEARIC ACID, ALUMINUM SALT; (ALUMINUM STEARATE)
CAS:637-12-7
RTECS #:WI2820000
Fraction by Wt: 1-10%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Ingred Name:BENTONITE
CAS:1302-78-9
RTECS #:CT9450000
Fraction by Wt: 1-10%

Ingred Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 20-30%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192

Ingred Name:AMORPHOUS SILICA
CAS:7631-86-9
Fraction by Wt: 15-25%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:CALCIUM OXIDE
CAS:1305-78-8
RTECS #:EW3100000
Fraction by Wt: 10-20%
OSHA PEL:5 MG/M3
ACGIH TLV:2 MG/M3; 9192

Ingred Name:BUTENE POLYMERS; (POLYBUTYLENE)
CAS:9003-29-6
RTECS #:EM9032000
Fraction by Wt: 10-20%

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 10-20%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:ALUMINUM SILICATES
Fraction by Wt: 1-10%

Ingred Name:MAGNESIUM OXIDE
CAS:1309-48-4
RTECS #:OM3850000
Fraction by Wt: 1-10%
OSHA PEL:15 MG/M3 PARTICULATE
ACGIH TLV:10 MG/M3;TDUST; 9293

Ingred Name:CARBONIC ACID, CALCIUM SALT (1:1); (CALCIUM CARBONATE)
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 1-10%
OSHA PEL:10 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

Ingred Name:ISOBUTYLENE ISOPRENE POLYMER
CAS:9010-85-9
Fraction by Wt: 1-10%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE IRRITATION.
    SKIN:REPEATED OR PROLONGED CONTACT MAY CAUSE IRRITATION. INHAL:NO
    ADVERSE EFFECTS ARE EXPECTED. INGEST:MAY CAUSE DIGESTIVE SYSTEM
    IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HAELTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
    MINUTES. CALL MD. SKIN:WASH WITH SOAP AND WATER. INGEST:DO NOT
    INDUCE VOMITING. CALL MD OR POISON CONTROL CENTER IMMEDIATELY.
    INHAL:REMOVE TO FRE SH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL
    RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT  WHEN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA AND OBSERVE PRECAUTIONS FROM
    OTHER SECTIONS. COLLECT SPILLED MATERIAL AND PLACE IN A CLOSED
    CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:FOR INDUSTRIAL OR PROFESSIONAL USE
    ONLY. AVOID EYE CONTACT. WASH THOROUGHLY AFTER HANDLING PRODUCTS.
    KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:CONTACT LENSES SHOULD NOT BE WORN WHEN WORKING WITH
    CHEMICALS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:A NIOSH/MSHA APPROVED SCBA IS REQUIRED IF TLV
    LIMITS ARE EXCEEDED.
Ventilation:LOCAL EXHAUST IS SUFFICIENT TO MAINTAIN VAPOR LEVEL BELOW
    TLV LIMITS.
Protective Gloves:NONE RECOM. IMPERVIOUS GLOVES .
Eye Protection:NONE RECOM. CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE RECOMMENDED.
Work Hygienic Practices:USE AS DIRECTED ON PRODUCT LABEL AND PRACTICE
    GOOD HABITS OF CLEANLINESS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.920
Solubility in Water:VERY SLIGHT.
Appearance and Odor:BLACK SOFT PUTTY.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:EXCESSIVE HEAT OR FLAMES.
Hazardous Decomposition Products:CO, CO2, AND SMOKE PARTICLES WHEN
    EXPOSED TO EXCESSIVE HEAT OR FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE BULK PRODUCT AFTER MIXING WITH
    FLAMMABLE MATERIAL IN AN INDUSTRIAL OR COMMERCIAL FACILITY.
    DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.